Omnitron iConverter 10 FL / T

Omnitron 10FL/TThe iConverter 10FL/T managed media converters are members of the modular iConverter product family, and provide 10BASE-T copper to 10BASE-FL fibre conversion.

The iConverter 10FL/T models support multimode and singlemode dual fibre with ST, SC and LC connectors; and singlemode single-fibre with SC connectors. The RJ-45 port supports 10BASE-T in either Half or Full-Duplex mode. A UTP crossover switch eliminates the need for a crossover cable and facilitates connectivity to network equipment such as hubs, switches and workstations.

The 10FL/T features user-selectable Link Propagate and Remote Fault Detection modes to facilitate quick fault detection, isolation and reporting.

iConverter 10FL/T modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. They can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC or DC powered chassis.

Benefits include

  • The iConverter 10/FLT is an IEEE 802.3 compatible 10BASE-T UTP to 10BASE-FL fibre converter
  • Supports multimode, single mode, and single fibre with ST, SC, LC and MT-RJ connectors
  • UTP port automatically supports Full or Half Duplex 10Mbps Ethernet
  • UTP crossover switch eliminates the need for a crossover cable
  • User selectable link fault detection modes facilitate quick fault detection, isolation and reporting
  • Management is available with the addition of a management module to the chassis
  • SNMP management via NetOutlook®
  • Real time port and module information, remote parameter configuration and trap notification
  • Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
  • LED displays for immediate visual status of each port
  • Lifetime Warranty and free 24/7 Technical Support


The iConverter 10FL/T can be used in managed or unmanaged applications. Management provides remote configuration, monitoring and trap notification. Management of the 10FL/T is accomplished by installing an iConverter Management Module (NMM2) or Network Interface Device (NID) in the same chassis.

The Management Module can be accessed via SNMP, Telnet, and serial port. The 10FL/T can be managed with Omnitron’s intuitive, graphic-oriented NetOutlook SNMP Management Software or third party SNMP management software. Management via the Telnet and the serial interfaces have an easy-to-use, menu-driven interface.

The management software can override the physical DIPswitch settings such as Link Propagate or Remote Fault Detection. Other parameters include module type and model, hardware and software revisions, serial numbers and a userdefined identifier.

The iConverter 10FL/T supports SNMP trap notification for the monitoring and notification of different network events. Specific events that generate traps include module insertion and removal, and port link-up and link-down. Trap monitoring of specific events can be selectively enabled or disabled by the network management software.


Protel - Download the datasheet


10FL/T is also available in the FlexPoint unmanaged media converter range. Click the link below for more information.

Contact Protel Solutions about this product

Please enter your contact details below with a brief outline of how we may be able to support you. One of our Engineers with then contact you to discuss your requirement further.

Your Name (required)

Your Email (required)


Phone number


Your Message


Phone: + 44 (0)1983 450018