Omnitron iConverter Fibre to Fibre

Fibre-to-fibre media converters are compact devices that provide seamless integration of different fibre types by converting multi-mode fibre to single-mode fibre, and dual fibre to single-fibre. Fibre-to-Fibre media converters extend network distance by converting wavelengths (1310 to 1550), amplifying optical power, and can support the “Three Rs” to Retime, Regenerate and Reshape the optical signal.

Full Omnitron iConverter Fibre to Fibre product pages

iConverter XG and XG+

iConverter XGThe iConverter XG and XG+ support 100% traffic throughput and have no packet size restrictions. Ultra low packet latency enables high-performance connectivity for data centres and financial networks. All models are protocol transparent within the range of 9.95Gbps to 10.71Gbps or 9.95Gbps to 11.32Gbps, providing interoperability with 10G Ethernet, 10G SONET/SDH, 10G Fibre Channel and 10G OTN (G.709).

 

iConverter XFF

iConverter XFFThe iConverter xFF operates as a protocol and rate-transparent device, supporting Small Form Pluggable (SFP) transceivers with data rates from 1Mbps to 8.50Gbps. The xFF supports a variety of network protocols, including Ethernet, Fast Ethernet, Gigabit Ethernet, SONET (OC-3/12/48), SDH (STM-1/4/16), 1x/2x/4x/8x Fibre Channel and Common Public Radio Interface (CPRI).

 

iConverter 2GXM

The iConverter 2GXM modules are not supported in future software releases and are not recommended for new designs or deployments. Please view the 2GXM2 for more information

 

iConverter 2GXM2

iConverter 2GXM2The iConverter 2GXM2 is a carrier-grade Network Interface Device (NID) that provides Gigabit Ethernet fibre to fibre media conversion with integrated management. For Service Providers, the 2GXM2 NID provides MEF 9, 14 and 21 certified demarcation of Carrier Ethernet E-Line services. The 2GXM2 is a cost-effective demarcation device for Service Providers to deliver best-effort Ethernet services.

 

iConverter 100FF

iConverter 100FFThe iConverter 100FF is a Fast Ethernet fibre-to-fibre media converter available as a compact, unmanaged standalone unit or a managed chassis plug-in module. The iConverter 100FF provides a cost-effective solution to extend fibre network distances with multimode to single-mode, dual fibre to single fibre, and wavelength (850/1310 and 1310/1550) conversion.

 

iConverter 1000FF

iConverter 1000FFThe iConverter 1000FF is a Gigabit Ethernet fibre-to-fibre media converter available as a compact, unmanaged standalone unit or a managed chassis plug-in module. The iConverter 1000FF provides a cost-effective solution to extend fibre network distances with multimode to single-mode, dual fibre to single-fibre, and wavelength (850/1310, 850/1550 and 1310/1550) conversion.

 

iConverter GX/F

iConverter GX/FThe iConverter GX/F extends network distances by connecting multimode fibre network devices over single-mode fibre cabling. It regenerates and retimes the fibre optic signal, and multiple GX/F repeaters can be cascaded to extend total network distances. The GX/F also converts between Gigabit Ethernet fibre and Fast Ethernet fibre enabling seamless integration between Gigabit Ethernet and legacy Fast Ethernet networks.

 

iConverter GX/X

iConverter GX/XThe iConverter GX/X managed two-port Gigabit Ethernet switch and fibre converter is a member of the modular iConverter product family. The GX/X provides single-mode to multimode fibre conversion for extending network distances up to 12km by connecting multimode fibre network devices over singlemode fibre cabling. The GX/X also functions as a repeater, regenerate and re-time the fibre optic signal. Multiple GX/X modules can be cascaded to extend total network distances.

 

iConverter 2FX

iConverter 2FXThe iConverter 2Fx is a Fast Ethernet fibre-to-fibre media converter that provides multimode to single-mode and dual fibre to single fibre conversion with advanced switching features. The 2Fx is a member of the modular iConverter product family, and is a cost-effective solution to extend fibre network distances over single-mode fibre cabling. The iConverter 2Fx regenerates and re-times the fibre optic signal, and multiple 2Fxs can be used to extend total network distances.

 

iConverter 2FXM

The iConverter 2FXM modules are not supported in future software releases and are not recommended for new designs or deployments. Please view the 2FXM2 for more information.

 

iConverter 2FXM2

iConverter 2FXM2The iConverter 2FXM2 is a carrier-grade Network Interface Device (NID) that provides Fast Ethernet fibre to fibre media conversion with integrated management. For Service Providers, the 2FXM2 NID provides MEF 9, 14 and 21 certified demarcation of Carrier Ethernet E-Line services. The 2FXM2 is a cost-effective demarcation device for Service Providers to deliver best-effort Ethernet services.

 

iConverter OC3FF

iConverter OC3FFThe iConverter OC3FF is an OC-3/STM-1 fibre-to-fibre media converter available as a compact, unmanaged standalone unit or a managed chassis plug-in module. The iConverter OC3FF provides a cost-effective solution to extend fibre network distances with multimode to single-mode, dual fibre to singlefiber, and wavelength (1310/1550) conversion.

 

iConverter OC12FF

iConverter OC12FFThe iConverter OC12FF is a OC-12/STM-4 fibre-to-fibre media converter available as a compact, unmanaged standalone unit or a managed chassis plug-in module. The iConverter OC12FF provides a cost-effective solution to extend fibre network distances with multimode to single-mode, dual fibre to singlefiber, and wavelength (850/1310 and 850/1550) conversion.

 

 

Contact Protel Solutions about this product

Please enter your contact details below with a brief outline of how we may be able to support you. One of our Engineers with then contact you to discuss your requirement further.

Your Name (required)

Your Email (required)

Subject

Phone number

Website

Your Message

captcha

Phone: + 44 (0)1983 450018