Omnitron iConverter GX/X

iConverter GX/XThe iConverter GX/X managed two-port Gigabit Ethernet switch and fibre converter is a member of the modular iConverter product family. The GX/X provides single-mode to multimode fibre conversion for extending network distances up to 12km by connecting multimode fibre network devices over singlemode fibre cabling. The GX/X also functions as a repeater, regenerate and re-time the fibre optic signal. Multiple GX/X modules can be cascaded to extend total network distances.

iConverter GX/X models support multimode and single-mode dual fibre with SC and LC connectors; and single-mode singlefibre with SC connectors. The iConverter GX/X features two 10/100 Ethernet backplane ports to provide connectivity to adjacent modules for network expansion and for in-band connectivity to an iConverter Network Management Module.

The iConverter GX/X advanced features include IEEE 802.1Q VLAN and 802.1p Quality of Service prioritization standards, and Port Access Control, which provides the ability to enable or disable individual ports to control delivery of services. The GX/X also supports port-level MIB statistics reporting real time packet statistics to provide performance and operational monitoring.

The GX/X features user-selectable Link Propagate, Link Segment, Remote Fault Detection and Symmetrical Fault Detection modes to facilitate quick fault detection, isolation and reporting.

Benefits Include

  • Two Gigabit Ethernet fibre ports
  • Supports 1000BASE-X (IEEE 802.3z)
  • Supports multimode, single-mode dual fibre with SC and LC connectors, and single-mode single-fibre with SC connectors
  • Features Port VLAN, Tag VLAN, Port Access Control and MIB statistics
  • Full-Duplex auto-negotiation or manual negotiation
  • User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
  • Two 10/100 Ethernet backplane ports for connectivity to adjacent iConverter modules
  • Modules are hot-swappable in 19-Module, 5-Module2-Module or 1-Module chassis
  • Management is available with the addition of a management module to the chassis
  • SNMP management via NetOutlook® provides real-time port and module status information, remote parameter configuration and trap notification
  • Commercial (0 to 50°C) and wide (-40 to 60°C) temperature ranges
  • Lifetime Warranty and free 24/7 Technical Support

Management

The iConverter GX/X can be used in managed or unmanaged applications. Management provides remote configuration, monitoring and trap notification. Management is accomplished by installing an iConverter Management Module (NMM2) or Network Interface Device (NID) in the same chassis.

The Management Module can be accessed via SNMP, Telnet, and serial port. The GX/X can be managed with Omnitron’s intuitive, graphic-oriented NetOutlook SNMP Management Software or third party SNMP management software. Management via the Telnet and the serial interfaces have an easy-to-use, menu-driven interface.

The management software can override the physical DIPswitch settings such as auto-negotiation and Backplane Selection, and remotely configure additional parameters including VLAN, Port VLAN and Port Access Control. Some of the real-time GX/X parameters that can be monitored include duplex mode, link and data receive status. Other parameters include module type and model, hardware and software revisions, serial numbers and a user-defined identifier. The port MIB statistics include transmit and receive packet counts and error counts.

The iConverter GX/X supports SNMP trap notification for the monitoring and notification of different network events. Specific events that generate traps include module insertion and removal, and port link-up and link-down. Trap monitoring of specific events can be selectively enabled or disabled by the network management software.


Protel Solutions.co.uk - Download the datasheet

Contact Protel Solutions about this product

Please enter your contact details below with a brief outline of how we may be able to support you. One of our Engineers with then contact you to discuss your requirement further.

Your Name (required)

Your Email (required)

Subject

Phone number

Website

Your Message

captcha

Phone: + 44 (0)1983 450018