Omnitron miConverter GX/T

miConverter GX/TThe miConverter GX/T is a miniature 10/100/1000BASE-T RJ-45 copper to 1000BASE-X fibre media converter that supports jumbo frames up to 10,240 bytes. The miConverter GX/T provides cost-effective fibre connectivity from Ethernet switches to diagnostic equipment, desktop and laptop computers.

The GX/T features Small Form Pluggable (SFP) transceivers that support 1000BASE-X for interoperability with Gigabit fibre equipment. SFP transceivers enable adaptability to different fibre types, speed and distances, and support Coarse Wave Division Multiplexing (CWDM) technology to increase the bandwidth capacity of fibre infrastructure.

The GX/T also supports SC and ST fixed fibre connectors for multimode, single-mode fibre; and single mode single-fibre models are available.

The Plug-and-Play capability of the miConverter GX/T simplifies fibre-to-the-laptop and fibre-to-the-desktop deployments. Both the fibre port and the RJ-45 port support auto-negotiation to achieve the best possible mode of operation (speed, duplex mode and Pause mode) between the devices. The auto-negotiation feature can be disabled on both ports (for manual configuration) using DIP-switches on the module. This is useful in a situation where the GX/T is connected to a non-negotiating device and the configuration parameters must be set manually.

Network flow control is managed by the Pause function (configured via auto-negotiation or manually) that prevents network congestion on both the RJ-45 and fibre ports. When Pause is enabled and the device is experiencing network congestion, it will send out a Pause signal to its link partner, instructing it to slow down data transmission.

The GX/T generates a remote fault indication when it detects link fault conditions, and reports detection of these signals by displaying status on the LED. Through user DIP-switch configuration, the detection of these indicators or link modes can also be propagated to the other port on the GX/T as a means of notifying connected end-devices of the link fault.

Diagnostic data is provided through LED indicators that assist in network installation and maintenance. The LEDs report the availability of power, port activity and link status and speed.

The miConverter GX/T combines Gigabit Ethernet connectivity with the lightweight design and low-power consumption required for both permanent deployment and mobile service networks.

The external AC power supply is available in US, Universal and Country/Region specific models. Country/Region specific models feature optional interchangeable connectors, allowing for compatibility with electrical outlet types found around the world. The GX/T is also available with a terminal connector for DC power between 5 to 12 volts.

Weighing less than 5 oz. with the USB Power Adapter Cable, the miConverter GX/T can easily fit into any pocket or laptop carrying case. It can also be attached to portable equipment using the included Velcro® strips or wall-mounted using the optional wall-mounting bracket kit.

The miConverter GX/T can be mounted in the miConverter 18-Module Power Chassis to consolidate individual modules into a rack-mount form factor that can be deployed where multiple fibre optic links are distributed from UTP switch equipment. The chassis powers converter modules with barrel-style DC connectors, and is available with a single universal AC, 24VDC or 48VDC internal power supply. This compact, high-density chassis is 1.5 rack units high, and can be mounted in a standard 19” or 23” equipment rack

Benefits Include

  • Supports 10BASE-T, 100BASE-TX, 1000BASE-T, 1000BASE-X and the IEEE 802.3 specification
  • Small and lightweight (5 ounces)
  • Cost-effective mounting and proven solution
  • Supports MDI/MDIX auto-crossover
  • Plug-and-Play capability
  • USB power via optional Power Adapter Cable
  • Supports Full/Half-Duplex fibre optic auto-negotiation
  • Multimode and single-mode fibre options
  • LED indicators for RJ-45 and fibre port status
  • Domestic, Universal and Country/Region specific power supply options
  • Wall-mount with optional mounting brackets or an 18-Module Powered Chassis
  • Commercial (0 to 50ºC), wide (-40º to 60ºC), extended (-40º to 75º C) and industrial* (-40º to 85ºC) temperature ranges
  • Lifetime Warranty and free 24/7 Technical Support

Application Example

The application diagram depicts a laptop computer connected to a fibre network.

miConverter GX/T Application Example

The miConverter GX/T connects to the laptop via two cables. The USB Power Adapter Cable powers the GX/T by drawing electrical current from the USB port (1.0 or 2.0) of the laptop. The UTP cable links the laptop network port and the miConverter GX/T copper port. The GX/T converts the 10/100/1000BASE-T UTP signal to a 1000BASE-X fibre signal, which can extend the fibre link up to 140km. Power from the USB port of the computer is automatically shut off when the computer is powered down, turning off the miConverter GX/T when fibre conversion is no longer needed.

The cost-effective miConverter GX/T is ideal for connecting large numbers of workstations in unmanaged fibre-to-the-desktop Gigabit Enterprise network applications. These applications can include remote edge locations where power outlets are at a premium, such as portable, temporary facilities. The miConverter GX/T is also an excellent solution for construction and military fibre-to-the-laptop applications where Gigabit fibre connectivity is required and local power is not available.

Protel Solutions.co.uk - Download the Datasheet

Managed and Unmanaged

GX/T is also available in the iConverter managed and FlexPoint Unmanaged media converter ranges. Click the links below for more information.

Contact Protel Solutions about this product

Please enter your contact details below with a brief outline of how we may be able to support you. One of our Engineers with then contact you to discuss your requirement further.

Your Name (required)

Your Email (required)

Subject

Phone number

Website

Your Message

captcha

Phone: + 44 (0)1983 450018